Paul Howard Fluting Jig

£132.50 excl.Vat(£159.00 inc.Vat)

Product Code: PHFJ
Category:
Manufacturer:
Purchase this product now and earn 133 Points!

Product Description

The Paul Howard Fluting Jig has been specifically developed to make adding flutes to your work as easy as possible. A router is required and mounted in the Fluting jig.

Your lathe should have a spindle height between 80mm and 310mm to use this jig.

Your router should have a standard 43mm collar and be able to be removed from its base.

If you require more height you can use a base plate. A base plate should be used on a lathe with round bed bars.

Reducer collars are available to suit die grinders or other tools with a parallel collar.  The Trend T3 has a 42mm collar so a 0.5mm shim can be supplied. The Trend T4 has a 43mm collar.

 

  • Base fitted with plastic liner.
  • Router carrier can be adjusted along the length of the base.
  • Height and length adjustment for guide bush.
  • Router not included.

Paul Howard recommends the Makita RT0700 or Trend T4 routers for use with this jig.